Drink Bowl Spare parts Archives - United Milking Systems

38mm / 1.5″ Drain Off

admin — Mon, 25 Sep 2023 11:45:49 +0000

Manufactured from hard, durable plastic the 1.5″ drain off (DOF3) is fitted to make cleaning and disinfecting quick and easy, with neoprene seals around the base and in the cap ensures a waterproof and leak free seal and the retaining nut makes it quick and easy to change too.

Hard wearing, durable & frost resistant plastic drain off
Non porous plastic for reduced bacteria ingress
Moulded thread along full length of shaft connector
Can be removed and replaced with ease
Easily cleaned and disinfected

The post 38mm / 1.5″ Drain Off appeared first on United Milking Systems.

75mm / 3″ Drain Off

admin — Mon, 25 Sep 2023 11:45:49 +0000

Manufactured from hard wearing, durable rubber the 3″ drain off (DOF7) is fitted to make cleaning and disinfecting quick and easy. The DOF7 fits into the trough then with a few turns of the screw top, this squeezes the rubber between 2 stainless steel plates to fill the hole in the trough. The DOF7 can be removed and replaced quick and easily

Hard wearing, durable & frost resistant rubber
Smooth finish for reduced bacteria ingress
Corrosion free stainless steel components
Can be removed and replaced with ease
Easily cleaned and disinfected

The post 75mm / 3″ Drain Off appeared first on United Milking Systems.

Galvanised Hook Over Gate Bracket (For MB1 & MBB1)

admin — Mon, 25 Sep 2023 11:45:49 +0000

A galvanized wall bracket compatible with the MB1 and MBB1 models.

Our 17L Multi Bucket features three separate feeding compartments, allowing three calves to feed simultaneously. The bucket can be pre-bored for easy teat installation, streamlining the feeding process. Teats and brackets are available separately.

The post Galvanised Hook Over Gate Bracket (For MB1 & MBB1) appeared first on United Milking Systems.

3/4″ Valve Part 2 – Bent

admin — Mon, 25 Sep 2023 11:45:46 +0000

The BV3/4-B (3/4″ Brass Valve) is manufactured from high quality brass. The valve is fully adjustable by easily manipulating the arm, this enables the user to have full control over fill levels. The valve is easily cleaned and disinfected and can be removed and replaced quickly and with ease. Secured to the Dinking bowl or Water trough with a brass retaining nut, Capable of delivering up to 35L/Min ensures the drinking trough will always have fresh and clean water easily accessible to the animals.

Capable of delivering 35L/Min
Retaining nut prevent moving in the trough
Fully adjustable fill level control
Can be removed and replaced with ease
Easily cleaned and disinfected

The post 3/4″ Valve Part 2 – Bent appeared first on United Milking Systems.

Blanking Cap

admin — Mon, 25 Sep 2023 11:45:45 +0000

The BC4 (1″ Blanking Cap) is manufactured from tough, impact resistant and durable polyethylene. The blanking cap can be inserted into the extra valve hole in the DBL4 to prevent water from getting in between the two skins of plastic, increasing the drinkers durability, or can be placed in the DOF1 of the Equine feeders to prevent feed getting lodged inside and blocking the drain off. The blanking cap can be removed and replaced quickly and with ease for easy cleaning and disinfection.

Increases durability of the DBL4
Prevents feed from lodging in the equine feeders
Easy to clean and disinfect
Can be removed and replaced with ease
Can withstand extreme weather conditions for long life span

The post Blanking Cap appeared first on United Milking Systems.

3/4” Valve (75L/min)

admin — Mon, 25 Sep 2023 11:45:45 +0000

The BV3/4 (3/4″ Brass Valve) is manufactured from high quality brass. The valve is fully adjustable by easily manipulating the arm, this enables the user to have full control over fill levels. The valve is easily cleaned and disinfected and can be removed and replaced quickly and with ease. Secured to the Dinking bowl or Water trough with a brass retaining nut, Capable of delivering up to 35L/Min ensures the drinking trough will always have fresh and clean water easily accessible to the animals.

Capable of delivering 35L/Min
Retaining nut prevent moving in the trough
Fully adjustable fill level control
Can be removed and replaced with ease
Easily cleaned and disinfected

The post 3/4” Valve (75L/min) appeared first on United Milking Systems.

JFC Water Drinker Protection Brackets

admin — Tue, 06 Jun 2023 14:16:11 +0000

Our PB01 protection bracket is manufactured from high quality galvanised steel and has been designed with rounded edges specifically for animal safety. The framework is designed to fit the DBL4 & both DBL8 drinking troughs offering greater protection against damage from the animals rubbing or scratching on the trough whilst offering protection of the water connections on the trough, the rear plate has several mounting points meaning this can be fitted into existing drilled holes

High quality galvanised steel frame.
Multiple mounting points for easy fitting.
Designed to fit perfectly round the DBL4 & both DBL8 drinking troughs.
Easily cleaned and disinfected..
Suitable for internal and external use.

The post JFC Water Drinker Protection Brackets appeared first on United Milking Systems.